1/13/2017 11:32:22 AM by
FunFungi
(Edited: 1/13/2017 11:58:32 AM)
Views: 1584
New Interrogation Room
By: Richabri
The Interrogation Room is a 12-piece (PP2) prop set replicating a police
Interrogation Room setting complete with furniture and equipment pieces.
All areas of the set are completely accessible to the camera due to the modular design of the set that allows almost every set element to be used/removed from your scene as necessary.
The Interrogation Room also comes with two PZ3 files: the I-Room (Back).pz3 file and I-Room (Front).pz3 that loads in the set from the back area or front area respectively, complete with the appropriate walls removed and lighting rig set up for that view.
The Interrogation Room set includes everything you need to set up a police interrogation scene including:
Props (PP2):
====================
BUILDING PROPS:
=================
!Ceiling
!Floor
!Wall-Back
!Wall-Front
!Wall-Left
!Wall-Right
!Wall-Window
EQUIPMENT PROPS:
=================
Bench
Chair
Desk
Table
Wall Clock
Everything comes as Poser ready props that can be loaded from the content palette under the Props section or for even easier use, load one of the PZ3 scene files that will load in the props with a default lighting rig.
The Interrogation Room set also comes with all of the texture templates to allow you to give the props a custom look of your own design.
Product Requirements and Compatibility:
Daz Studio 3+
Poser 5+
Mohawk 2 For Genesis, V5, M5, G2F, V6, G2M, M6, G3F, V7, G2M And M7
By: farconville
Mohawk 2 hair was made especially for Genesis, Victoria 5, Michael 5, Genesis 2 Female, Victoria 6, Genesis 2 Male, Michael 6, Genesis 3 Female, Victoria 7, Genesis 3 Male and Michael 7 with colors and styles to choose from. The Mohawk 2 hair comes with morph sliders. Your imagination is the only limit.
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser Not Supported
Geneis 1
Genesis 2
Genesis 3
V Bodysuit For Genesis 3 Female(s)
By: Xart-3D
V Bodysuit for Genesis 3 Female(s):
Morphs:
Bikini Shape
Front Shape 01 (open)
Front Shape 02 (open)
06 Daz Studio Iray Material Presets
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser Not Supported
Genesis 3 Female
Expressions For Monique 7
By: SF-Design
Emotions from smiles and anger to sadness, joy and surprise!
Created as pose control morph dials to give you complete control on how much or how little of the expression you want to add to your character.
Easily add micro expressions or use them to mix-and-match to achieve many different expressions.
You also get 20 expression presets and one reset preset.
The expressions perfectly complement poses for Monique 7.
Get the right expression for Monique 7!
Contents:
Expression Control Dials & Presets
Afraid
Angry
Bite Lip
Bored
Content
Gaze
Innocent
Inquiring
Laughing
Mean
Ohh
Pensive
Sad 1
Sad 2
Serious
Sexy
Smile
Smile Broad
Smile Subtle
Yawn
Reset (preset only)
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser Not Supported
Monique 7
Artistic Poses For Genesis And M5
By: farconville
Artistic poses is composed of 20 poses for default Genesis and Michael 5. Files for DAZ Studio 4.9 and up are included in this set. Apply INJ pose files directly to Genesis or Michael 5 Hero, then apply poses. Keep Limits ON when prompted.
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser Not Supported
Michael 5
Green Room
By: Kawecki
A nice Green Room figure prop with six lamps that an illuminate the walls with a nice lighting effect.
- LAMPS
In Poser 9, 10, 11 the lamps can illuminate the scene. In older versions of Poser the amps will render as amps, but will not contribute to the illumination of the scene. In order for the lamps to emit light you must check on "indirect lights" in the Rendering Settings. Depending of the desired illumination effects, you may need to change the illumination level of the lamps. Go to the Material Room and change the ambient value of the material "lamp" of the Green Room. The default value is 100 and you can use values as high as 1000 or lower it to 1.0. This value also depends if you use Gamma Correction or not in the rendering. If you want the lamps to stop emitting light, just uncheck "light emitter" in the properties of the BODY part "lamps" of the Green Room character.
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser 9+
ArtDev Zbrush Assets - Custom Skin Brushes 1
By: CGbytes
Our LIVE training events teach you how to model, texture and rig clothing and shoes in Zbrush for Genesis 3 in Daz Studio.
Get these Zbrush Assets for FREE for a limited time.
Book Mark this link: CGBytes: Artist Development Seminars Live
Subscribe to our Newsletter to get the announcement for the next LIVE date.
Follow us on Facebook
Free Product includes:
5 skin texture swatches
8 Zbrush skin brush files
Zbrush 4R7 REQUIRED to use these assests
Product Requirements and Compatibility:
Zbrush 4r7