Arena Core Pack For Daz Studio 4.8+
Warning! Content Advisory: Some images may contain content not suitable for all viewers.
davo_arenacoreDS_popup01CG.jpg davo_arenacoreDS_popup02CG.jpg davo_arenacoreDS_popup03CG.jpg davo_arenacoreDS_popup04CG.jpg davo_arenacoreDS_popup05CG.jpg davo_arenacoreDS_popup06CG.jpg


Arena Core Package for Poser DazStudio 4.8+

Vendor/Creator: Davo or Davorama

Daz Studio Optimization: Freeone

Need Help?  

Technical issues:


DazStudio related issues:   

Copyright (c) 2016 davo. All rights reserved. Not intended for
Thank you for purchasing the "Arena Core" Package for DazStudio 4.8+ from Davo and Freeone
The Arena Core package is a Romanesque style arena that you can use for your close combat/gladiator style action or public punishment displays. This set comes with the Arena environment, chopping block and cruciflex punishment devices.
System Requirements:

- PC and Mac compatible
- Not tested in Mac
- Requires DazStudio 4.8+
- Poser 8+ Only version is available with V4/M4 support (sold separately)
- All files in .duf, .dsf .png and .jpg format.

Figure Library Features:
- Arena: The Arena is a circular style arena with 4 walls that can be moved out of view. The floor of
the arena will move the entire figure.  The front wall has a tower in the middle of it that has a draw bridge and gate. The drawbridge and gate are posable. You can move the tower up and down, there is a hidden room under the tower that can be moved up to floor level. Raising this room with elevate the drawbridge up the a level that can be used in conjunction with the central platform in the middle of the floor.  The platform base can be moved down and out of view so the arena floor is empty. Each wall can be moved out of view for good camera angles.  The back wall has a showbox attached to it. This showbox is for for seating the important or elite viewers. This showbox can be moved out of view if desired.
- Cage: This is a small jail cell or holding cage, it can be moved up against one of the inner walls. It has posable doors.
- False Door 1: This is a door frame with posable door. You can insert and attaches this to the walls of the arena to simulate access to the upper level of the arena.
- False Door 2: This is false door for the showbox, it has a posable curtain. It will insert to the showbox level.
- Fight Ring Base: This is a combat ring similar to a boxing or wrestling ring. There are smart prop chains, boards and spikes in the props library to enclose the ring.
- Gate Wall: This gate wall can be used to replace any of the walls in your arena to add a different arena entry style. Gates are posable.
- Mound 1: This is a mound of dirt that matches the arena floor so you can have some slightly elevated action.
- Platform: This is a raised platform with width, height and depth morphs. The feet are posable with similar morphs. You can use this for elevated action if you want to put your characters "on display".
- Slave Pen: This is an add-on pen that you can place behind the Gate Wall. Parent it to the gate wall, the gate acts as the 4th wall for the pen.
- Spike Pad: This is good for impalement scenes. Each spike can be repositioned if wanted.
- Spike Wall: This is a spiked barrier to throw your characters on for sport. It is posable, angle adjustable and width morphs are included.

The pit figures are optional floor figures. You must make the arena figures "Floor" hidden to use these additional figures.

- Pit 1: This is an optional floor for the anena with a pit. The floor is slanted so you can fall into the pit. There is a water level in the pit for water peril. You might have to scale the water level larger the higher you bring it to the floor level.
- Pit 2: This pit is a sunken fighting ring style pit. Good for, well, pit fighting.

Chop Blocks Library:

- Chop Block 1: This is a basic wood block with posable/re positionable arm restraint bars and chain links. The block can raise and lower above the base to adjust the height. These bars/links are symmetrical mirroring for easy posing from side to side.
- chop block 2: This is a cool "double paper cutter" style decapitation block, it can fit 2 characters plus an executioner. There is a height morph to adjust the frame height, then move the frame down to the base for low on the floor posing.
- Platform: This is a basic platform with width, depth and height morphs. You can use it for elevated viewing of executions, you will just have to move your chop blocks and characters up to the height you want.
Pose files for V4, M4 and the Genesis 3 male and female and matching poses for the equipment are provided in the Pose library. A smart prop Axe and starter poses for the axe are also provided in the pose library.

Cruciflex Library:

- Cruciflex: This is a cruel multi-purpose crucifix style torture device. It has a base, central post, two cross beams and 4 arm/leg cross poles. There are also arm, leg and neck chains as well as a posable wood bit gag with posable side chains.  In addition, there also ten spikes to affix your character to the cruciflex.  But wait, that's not all. There is also a D armature and spiked back pusher as well.
The chains have re-positionable chain bases. All the the arm/leg posts and chains are symmetrical mirroring for faster posing.
The post can move up and down and it as well has the cross beams and arm/leg posts have length morphs.
Poses for the V4 and Genesis 3 Female are provided. Matching poses for the cruciflex are included.

Arena Specific props:

- Banner for Tower top: This is a large banner with a bland red fabric texture. You can use the texture map to create your own logo or design. This is a smart prop and will automatically apply to the Tower top.
- Banner: same as the tower banner, but not a smart prop. Position it wherever you want.
- Canopy: for Wall Back: This is a smart prop that will attach to the back wall just above the Showbox.
- Canopy: This is a non smart prop canopy if you want to use it for something else.
- Fight Ring Fence 1,2 and 3: These are smart prop barriers for use with the fight ring base figure. They will snap and parent automatically to the fight ring base.
- Rail A and B for Walls (back, right, left and front): These smart prop rails will add a railing around the perimeter of the arena upper level. The A and B option depends on whether you want to hide the showbox.
- Spike Fence and Spike Rail: These are spike barriers for the showbox. These are not smart props.
- Spike Fence and Spike Rail for Box Wall: These are smart prop versions of the above barriers.

Axe Library:
This folder contains a stand alone prop axe. The smart prop versions are for V4, M4 and Genesis 3 Female and Male and will position to your characters right hand.
There are hand poses to grasp the axe in the hand library, this is a starter only. You may have to adjust the fingers of your character to your specific needs.

Basic Iron Cuffs Library:
Genesis: Genesis 3 Female and Male figures.
These libraries contain smart prop cuffs to use in conjunction with the Arena and other various Davo products.  These smart props will automatically position and parent to your characters.
To apply the cuffs, click on your character in your preview window, then click to add each cuff or all, they will position automatically.

Pose Libraries:

The pose libraries contain poses for the different Arena devices.  There are V4, M4 and Genesis 3 Female and Male poses and matching poses for the equipment they are related to. You must first apply the poses to your character and then load/pose the related device. The prop will both load and pose parented to the character. If you wish to use a different pose delete the cuff and associated device first and repose. The stand alone devices are for free posing and are not required for the structured poses.

Axe Poses are starter poses only. You may have to adjust finger position and other body positions to suit your needs. Different characters are morphed differently and repositioning/adjustment may be necessary.

A detailed readme file is available in the product zip file.

Application Compatibility

Daz StudioDaz Studio 4.8+
PoserNot Supported
Other Notes
(Poser 8+ version is also available (sold seperately))

Figure Compatibility

Daz FiguresGeneration 4Michael 4
  Victoria 4
 Genesis 3Genesis 3 Female
  Genesis 3 Males
Other Notes
(V4 and M4 pose files/support also in this package)

Product Requirements

Other Notes
(Pose files for Genesis 3 male/female, M4 and V4 in this package.)

Related Products

Davo's Breaking Glass

Arena Core Pack For Daz Studio 4.8+

SKU: 54443
By: DavoFreeone

The Arena Core package is a Romanesque style arena that you can use for your close combat/gladiator style action or public punishment displays. This set comes with the Arena environment, chopping block and cruciflex punishment devices. This version is compatible with the Genesis 3 male and female


Twitter Facebook Pinterest

Others Also Purchased

"Hypno-Tronic 2" Mind Control Devices For Daz Studio 4.8+
Hospital Drip For Iray
"Dreadworks 5" Carousel Pack For DazStudio 4.8+
Legacy Davo World Of Pichard Set 3
Legacy Davo World Of Pichard Set 1
The Yeti For Genesis 3 Male
Tower Of Pain For DazStudio 4.8+
Minotaur Asterion

One of more of these images has been flagged as adult content.

If you are over 18 and wish to view these images, please hit Yes, otherwise hit No.