The Construction Trailer 04/25/17 by Richabri (Rick Bridenbaker) Thank you for purchasing the Construction Trailer set for Poser! https://www.cgbytes.com/content-artists/Richabri/126 All of this product's content was created by Richabri. =============================================================================== Description: =============================================================================== The Construction Trailer is a 17-piece (PP2) prop set replicating a modern construction trailer setting complete with enough equipment pieces to set up an on-site construction trailer scene. All areas of the set are completely accessible to the camera due to the modular design of the set that allows every set element to be used/removed from your scene as necessary. The Construction Trailer set also comes with two PZ3 files: the CT-Empty.pz3 file that will load in only the trailer props & grounds and the CT-Loaded.pz3 file which will load in the trailer, grounds and all the equipment props. Both provide a default lighting scheme with render parameters set to go. Lastly, the Construction Trailer set also gives you the option of either loading in the entire perimeter fence that loads automatically with the !!!!Grounds prop, or you can select and delete it and create a minimal fence to meet your own fencing requirements with the !!!Fence-Section prop(s) instead. The Construction Trailer set includes everything you need to set up an on-site construction trailer scene: Props (PP2): ==================== BUILDING PROPS: !!!!Grounds !!!Fence-Section !!Base !!Ceiling !!Wall-Back !!Wall-Front !!Wall-Left !!Wall-Right !Wall-Bathroom !Wall-Center EQUIPMENT PROPS: AC-Unit Calendar F-Chair F-Table Handset PR-Board Plans Everything comes as Poser ready props that can be loaded from the content palette under the Props section or for even easier use, load one of the PZ3 scene files that will load in the props with a default lighting rig. The Construction Trailer also comes with all of the texture templates to allow you to give the props a custom look of your own design. You will need Poser 5 (or higher) or Daz Studio to use this set. ============================================================================= Notes: =============================================================================== PROP LOADING: All of the 'building' props will load into their respective positions within the set. All of the 'equipment' props will load into the center of the Poser universe at the correct height. LIGHTING: The 'Outdoor' lighting scheme uses four infinite lights with only the 'Main' light having the ability to create shadows and the other three providing fill and accent lighting. The 'Indoor' lighting scheme uses one point light (Main) and three infinite lights with only the 'Main' light having the ability to create shadows and the other three providing fill and ambient lighting.Although this lighting rig provides a fairly balanced lighting of the complete interior I highly recommend adjusting it for any specific scenes you may create if you choose to use it. Most of the time, that will usually only involve using a Y-Rotation of the Main light and/or an X-Rotation of the Ambient light for the 'Outdoor' lighting and dragging the Main Point light wherever it's needed for the 'Indoor' lighting rig. DOORS: All doors have their joint parameters adjusted to swing open from the hinges with a normal Y-Rotation. There are no limits to the swing however so you should be careful to control the final position of the door(s) being opened. MOVING WALLS: Most of the accessory props are smart propped to their respective walls in the 'CT-Loaded' scene file, so if you need to remove a wall because it's obstructing the camera view, it's better to just Y-translate the wall you need to get it out of your way rather than delete it if you plan on bringing it back for successive renders. Otherwise, you'll have to reload all the accessory props along with wall. =============================================================================== To install: Unzip the archive (Const-Trailer.zip) to the root folder wherever you installed Poser: (i.e., C:\Program Files\Smith Micro\Poser 8). The files will decompress to the following folders: /Documentation Const-Trailer.txt License.Txt /Runtime /Geometries /Richabri /Const-Trailer ct-ac_unit.obj ct-b_wall.obj ct-base.obj ct-bth_fix.obj ct-bth_wall.obj ct-calendar.obj ct-ceiling.obj ct-charger.obj ct-clos_door.obj ct-cnt_wall.obj ct-desk.obj ct-ext_door.obj ct-f_chair.obj ct-f_sect.obj ct-f_supp.obj ct-f_table.obj ct-f_wall.obj ct-g_plane.obj ct-int_door.obj ct-l_wall.obj ct-mv_lights.obj ct-p_fence.obj ct-plans.obj ct-pr_board.obj ct-r_wall.obj ct-radio.obj ct-stairs.obj /Libraries /Light /Const-Trailer Indoor Lighting.lt2 Indoor Lighting.png Outdoor Lighting.lt2 Outdoor Lighting.png /Props /Const-Trailer !!!!Grounds.png !!!!Grounds.pp2 !!!Fence-Section.png !!!Fence-Section.pp2 !!Base.png !!Base.pp2 !!Ceiling.png !!Ceiling.pp2 !!Wall-Back.png !!Wall-Back.pp2 !!Wall-Front.png !!Wall-Front.pp2 !!Wall-Left.png !!Wall-Left.pp2 !!Wall-Right.png !!Wall-Right.pp2 !Wall-Bathroom.png !Wall-Bathroom.pp2 !Wall-Center.png !Wall-Center.pp2 AC-Unit.png AC-Unit.pp2 Calendar.png Calendar.pp2 F-Chair.png F-Chair.pp2 F-Table.png F-Table.pp2 Handset.png Handset.pp2 PR-Board.png PR-Board.pp2 Plans.png Plans.pp2 /Scene /Const-Trailer CT-Empty.png CT-Empty.pz3 CT-Loaded.png CT-Loaded.pz3 /Textures /Richabri /Const-Trailer ct-ac_unit.jpg ct-bth_fix.jpg ct-calendar.jpg ct-ceiling.jpg ct-chair.jpg ct-charger.jpg ct-device.jpg ct-door_win.jpg ct-f_cab.jpg ct-f_sect.jpg ct-f_table.jpg ct-fixtures.jpg ct-floor.jpg ct-gref.JPG ct-grounds.jpg ct-mref.jpg ct-mv_light.jpg ct-p_board.jpg ct-p_walls.jpg ct-plans.jpg ct-pvc.jpg ct-radio.jpg ct-shelving.jpg ct-stairs.jpg ct-steel.jpg ct-vanity.jpg ct-walls.jpg /Templates /Richabri /Const-Trailer Const-Trailer_Templates.txt ct-ac_unitT.jpg ct-bth_fixT.jpg ct-calendarT.jpg ct-ceilingT.jpg ct-chairT.jpg ct-chargerT.jpg ct-deviceT.jpg ct-door_winT.jpg ct-f_cabT.jpg ct-f_sectT.jpg ct-f_tableT.jpg ct-fixturesT.jpg ct-floorT.jpg ct-groundsT.jpg ct-mv_lightT.jpg ct-p_boardT.jpg ct-p_wallsT.jpg ct-plansT.jpg ct-shelvingT.jpg ct-stairsT.jpg ct-vanityT.jpg ct-wallsT.jpg pd-radioT.jpg =============================================================================== The Construction Trailer props should already be appropriately scaled for a standard Daz or Poser character. If you have any difficulties with the installation or use of these props please email me with a description of your problem and I will respond promptly. Happy Rendering !!!!