The Shotgun Shack																									05/24/14
by
Richabri (Rick Bridenbaker)


Thank you for purchasing the The Shotgun Shack for Poser!


All of this product's content was created by Richabri.


===============================================================================
Description:
===============================================================================
The Shotgun Shack is a twenty-six piece prop set replicating a rustic, one-room
narrow rectangular domestic residence known as a "Shotgun Shack". This is a
remake of the main building from my former 'Homestead Set'. The building was 
completely remodeled and re-textured to look much better but I re-designed the
set to make it very much better to set up scenes. The entire set is completely
modular so any of the walls and ceiling (roof) can be removed to make the entire
interior accessable to setting up your camera.

The 'Shotgun Shack' features a fully modeled exterior with a grounds setting and
low-poly tree model along with a fully modeled interior complete with basic 
furnishings.

The 'Shotgun Shack' also comes with two PZ3 files that will load in a set for
exterior renders of the building and grounds or one that will load the building
with furnishings for an interior scene.

You will need Poser 5 (or higher) or Daz Studio to use this set.

The 'Shotgun Shack' includes everything you need to set up a beautiful interior or 
exterior rustic scene including:

Building/Landscape Props:
=============================
!!!Grounds
!!SS-Preload
Base
Door Back
Door Front
Roof
Tree
Wall-Back
Wall-Front
Wall-Left
Wall-Right
           

Furnishings Props:
=============================
SS-Bed
SS-Blanket
SS-C_Pot
SS-Chair
SS-Cup
SS-Lamp
SS-Lantern
SS-Pegboard
SS-Pillow
SS-Pitcher
SS-Stand
SS-Stove
SS-Table
SS-Wall Shelf
SS-Wallhook
            

Everything comes as Poser ready props that can be loaded from the content 
palette under the Props section or for even easier use, load one of the two 
PZ3 scene files that will load in the props with a default lighting rig.

The Shotgun Shack also comes with all of the texture templates to allow you to 
give the props a custom look of your own design.


=============================================================================
Notes:
===============================================================================
All of the doors have their joint parameters adjusted to swing open from the
hinges with a normal Y-Rotation. There are no limits to the swing however and
you should be careful to control the final position of the door being opened.

All lighting schemes use 4 infinite lights with only light (Main) having the 
ability to create shadows and the other three providing fill and accent lighting. 
Usually all that will be needed to light most scenes is to Y-Rotate the Main
light. The lighting presets were provided to give a general illumination of this
set. They should be adequate for most scenes but I highly recommend adjusting 
them for any specific scenes you may create if you choose to use them.

All of the building elements (walls, roof & doors) have their shadow casting
ability turned on so you may wish to convert the Main light to a spot light
(rather than an infinite light) and posiion it into the interior of the building
for interior scenes. Otherwise the interior may be too darkened with shadows.
===============================================================================

To install:

Unzip the archive (ShotShack.zip) to the root folder
  wherever you installed Poser:
  (i.e., C:\Program Files\Smith Micro\Poser 8).
  
  The files will decompress to the following folders:
  
  /Documentation
    ShotShack.txt
    License.Txt
     
  /Runtime
    /Geometries
      /Richabri
        /Shot-Shack
         ss-b_wall.obj
         ss-base.obj
         ss-bed.obj
         ss-bkdoor.obj
         ss-blanket.obj
         ss-c_pot.obj
         ss-chair.obj
         ss-cup.obj
         ss-door.obj
         ss-e_lantern.obj
         ss-f_wall.obj
         ss-grounds.obj
         ss-l_wall.obj
         ss-lantern.obj
         ss-m_hook.obj
         ss-p_board.obj
         ss-p_tree.obj
         ss-pillow.obj
         ss-pitcher.obj
         ss-r_wall.obj
         ss-roof.obj
         ss-stand.obj
         ss-stove.obj
         ss-table.obj
         ss-w_shelf.obj
           
     /Libraries
      /Light
         /Shot-Shack
          !Default Lighting.lt2
          !Default Lighting.png
         
       /Props
          /Shot-Shack
           !!!Grounds.png
           !!!Grounds.pp2
           !!SS-Preload.png
           !!SS-Preload.pp2
           Base.png
           Base.pp2
           Door Back.png
           Door Back.pp2
           Door Front.png
           Door Front.pp2
           Roof.png
           Roof.pp2
           Tree.png
           Tree.pp2
           Wall-Back.png
           Wall-Back.pp2
           Wall-Front.png
           Wall-Front.pp2
           Wall-Left.png
           Wall-Left.pp2
           Wall-Right.png
           Wall-Right.pp2
           
           /SS-Furniture
            SS-Bed.png
            SS-Bed.pp2
            SS-Blanket.png
            SS-Blanket.pp2
            SS-C_Pot.png
            SS-C_Pot.pp2
            SS-Chair.png
            SS-Chair.pp2
            SS-Cup.png
            SS-Cup.pp2
            SS-Lamp.png
            SS-Lamp.pp2
            SS-Lantern.png
            SS-Lantern.pp2
            SS-Pegboard.png
            SS-Pegboard.pp2
            SS-Pillow.png
            SS-Pillow.pp2
            SS-Pitcher.png
            SS-Pitcher.pp2
            SS-Stand.png
            SS-Stand.pp2
            SS-Stove.png
            SS-Stove.pp2
            SS-Table.png
            SS-Table.pp2
            SS-Wall Shelf.png
            SS-Wall Shelf.pp2
            SS-Wallhook.png
            SS-Wallhook.pp2
            
     /Textures
        /Richabri
           /Shot-Shack
            ss-b_porch.jpg
            ss-b_wall.jpg
            ss-base.jpg
            ss-bed.jpg
            ss-blanket.jpg
            ss-c_pot.jpg
            ss-chair.jpg
            ss-cup.jpg
            ss-door.jpg
            ss-e_lantern.jpg
            ss-e_lantern_TR.jpg
            ss-f_porch.jpg
            ss-f_wall.jpg
            ss-gref.JPG
            ss-grounds.jpg
            ss-lantern.jpg
            ss-lantern_TR.jpg
            ss-m_hook.jpg
            ss-p_board.jpg
            ss-p_tree.jpg
            ss-pillow.jpg
            ss-pitcher.jpg
            ss-roof.jpg
            ss-s_wall.jpg
            ss-stand.jpg
            ss-stove.jpg
            ss-table.jpg
            ss-w_shelf.jpg
            ss-window.jpg
            ss_mref.jpg
             
     /Templates
      /Richabri
       /Shot-Shack
        Shot-Shack_Templates.txt
        ss-b_porchT.jpg
        ss-b_wallT.jpg
        ss-baseT.jpg
        ss-bedT.jpg
        ss-blanketT.jpg
        ss-c_potT.jpg
        ss-chairT.jpg
        ss-cupT.jpg
        ss-doorT.jpg
        ss-e_lanternT.jpg
        ss-f_porchT.jpg
        ss-f_wallT.jpg
        ss-groundsT.jpg
        ss-lanternT.jpg
        ss-m_hookT.jpg
        ss-p_boardT.jpg
        ss-p_treeT.jpg
        ss-pillowT.jpg
        ss-pitcherT.jpg
        ss-roofT.jpg
        ss-s_wallT.jpg
        ss-standT.jpg
        ss-stoveT.jpg
        ss-tableT.jpg
        ss-w_shelfT.jpg
        ss-windowT.jpg  
            
                       
    /!ShotShack PZ3 File
     SS-Exterior.pz3
     SS-Interior.pz3  

===============================================================================

The Shotgun Shack props should already be appropriately scaled for Daz's Mil 
characters. Some adjustments may be necessary to account for different body 
morphs.

If you have any difficulties with the installation or use of these props or 
poses please email me with a description of your problem and I will respond
promptly.

Happy Rendering !!!!