"Dreadworks 5" Core Package Poser 8+
davo_D5core_popup01_P8CGB.jpg davo_D5core_popup02_P8CGB.jpg davo_D5core_popup03_P8CGB.jpg davo_D5core_popup04_P8CGB.jpg davo_D5core_popup05_P8CGB.jpg davo_D5core_popup06_P8CGB.jpg davo_D5core_popup07_P8CGB.jpg davo_D5core_popup08_P8CGB.jpg davo_D5core_popup09_P8CGB.jpg davo_D5core_popup10_P8CGB.jpg davo_D5core_popup11_P8CGB.jpg davo_D5core_popup12_P8CGB.jpg davo_D5core_popup13_P8CGB.jpg davo_D5core_popup14_P8CGB.jpg davo_D5core_popup15_P8CGB.jpg davo_D5core_popup16_P8CGB.jpg davo_D5core_popup17_P8CGB.jpg davo_D5core_popup18_P8CGB.jpg davo_D5core_popup20_P8CGB.jpg

Description

Product:
Dreadworks 5 Core Pack for Poser 8+

Vendor/Creator: Davo or Davorama

-----------------------------------------------------------------------------------------------------------------------------------
System Requirements:
- PC and Mac compatible
- Requires Poser 8+  
- DazStudio version is available (sold separately) with material/surface zone adjustments and poses for the Genesis 3 figures
- All files in .obj, .cr2, .png and .jpg format.

-------------------------------------------------------------------------------------------------------------
Building Library:
Note: There are two libraries for the Building elements/figures, a shadow and no shadow version. If you not proficient with lighting, the no shadow library has all the shadow casting ability turned off on all the elements. This allows light to pass through the figures without casting a shadow.
 
- Building Pad: This is an elevated pad with built in railings. You can place these against the edge walls of the building for added interest. There are sizing morphs built into the pad and railings.
 
- Building: This is the main facility/building model. It has right and left hand wall segments that can be dropped out of view for good camera viewing angles. There is a moveable front and rear wall with posable door that moves up and down. You can stack several of these building models end to end to create a long assembly line look and feel by dropping one of the end walls out of view and
positioning another building in its place. The ceilings have a right and left side slanting portion so you can have an angled ceiling look and feel. This figure is symmetrical mirroring. You can mount the conveyor rail and tracks to the floor or ceilings for added interest.
 
- Conveyor Clamp 1: This is a clamp that can be added to the conveyor rail figure in order to make an assembly line look and feel. There are positioning pose files included in this package to parent and position various pieces of equipment (such as racks, restraint machines, pods and tanks) to the clamp. This is excellent for assembly line style renders. You must parent the clamp to the conveyor rail to make it permanently attached.
 
- Conveyor Clamp 2: This is a clamp that can be added to the conveyor rail figure in order to make an assembly line look and feel. This clamp is like clamp 1, except it has an additional bracket added to allow the clamp to swivel around. There are positioning pose files included in this package to parent and position various pieces of equipment (such as racks, restraint machines, pods and tanks) to the clamp. +
This is excellent for assembly line style renders. You must parent the clamp to the conveyor rail to make it permanently attached.
 
- Conveyor Rail: This rail is for transporting your restrained cargo down the assembly line. This rail has some built in size/shape morphs including a base tilt morph so you can run the rail at an angle. Try putting the rail on the ceiling too, that's pretty cool. You can parent several of the conveyor clamps to the rail and parent any of the equipment racks/machines/tanks to the clamp.
 
- Conveyor Rail Xtra: This is a short segment of the conveyor rail, it also has the same morphs as the conveyor rail figure.
 
- House 1: This is a cool housing that can be used for a variety of devious purposes. Your character goes in one side and comes out the other side, what goes on inside is mystery. Maybe cooking, cleaning, washing, drying? Who knows. This figure has posable doors, repositionable display monitor, height adjustable base and upper housing. Morphs are included to hide either side of the housing so it has an exposed look and feel. You can add the housing 1 elements and piping add-ons for more interesting uses, or add the tool station figure for some more operational procedures. You also could attach one or more tool stations to the housing. Positioning poses are included for the tool station.
 
- Housing 1 Elements: This figure can be added to the housing 1 figure. It's a set of heating elements. The upper mid elements can be hidden from view to make room for other equipment. Size/shape morphs are included and morphs to hide either the right or left side. Insert the elements and parent it to the housing so it is permanently attached to the housing.
 
- Housing 1 Piping: This figure is an add-on figure for the housing 1 figure. This figure has several pipes, hoses and multi purpose ports that can be re-arranged to suit your needs.  Go wild with your imagination. Insert the piping figure and parent it to the housing so it is permanently attached to the housing.
 
- Housing 2: This is a multi purpose figure that can be added to your assembly line. Your character passes under the housing and you can use anything you attach to the housing to menace your character. The housing and base have size/shaping morphs so you can adjust its fit. You also could
attach one or more tool stations to the housing. Positioning poses are included for the tool station.
 
- HVAC Unit 1: This is a large ventilation feature you can add to your scenes. It has height/shaping morphs for perfect fits. Add several to your scene for interest.
 
- Pipe Set 1: This is a large set of pipes you can add to your ceilings for interesting looks. Parent it to whatever body part you are adding it to.
 
- Pipe Set 2: This is a set of large hoses you can add to your ceilings for interesting looks. Parent it to whatever body part you are adding it to.
 
- Pipe Set 3: This is a hose/control panel feature you can add to any other figures in any package. Parent it to whatever body part you are adding it to.
 
- Track 1: This is another conveyor style track that you can use to transport your characters down an assembly line. It has size/shaping morphs for adjustments. There is a cover over the top slot of the track that can be morphed out of view if desired. You can place this on the floor or ceiling.
 
- Track 1 Xtra: This is a short segment of the Track 1 figure. It has the same morphs as the Track 1 figure.

--------------------
Cuff Systems Library
--------------------


++NOTE++ These cuff system figures require use of the provided basic iron cuffs for hands/feet/neck

- Cuff System 1: This is a behind the arms style cuff system with built in easypose restraint stand. This is a good figure to use inside one of the tanks figures. The upper arm band cuffs are morph size/shape adjustable. Each of the armatures/connectors and cuff hooks have size/shape adjustment morphs for fine tuning. This is a symmetrical mirroring figure for right and left sides.  There is a non-rending wire-frame displayed "base" body part that moves the whole cuff system around but allows each element to be moved independently. The "stembase" body part that has the easypose hose attached to it has an overall hose length morph that will adjust the full length of the hose at once. There are easypose master bending nodes in every tenth segment of the hose (shown in wire-frame in poser).  The stand base can be repositioned and hose posed into it. Some pose files are included for V4 in the pose library. (gen3female in the DS version)
 
- Cuff System 2: This is very similar to cuff system 1 but does not have the easypose stand built in. Same notes as Cuff System 1 apply.
 
----------------------
Equip-Machines Library
----------------------
 
- tool: This is a simple tool head with easypose hose attached to it. The tool head has several size/shaping morphs built in. The tool head also has an easypose dial setting to adjust the entire length of the hose at once. There are master easypose bending nodes every 15 segments. You can parent this tool to any other figure, then pose the hose back to some receptacle on another figure as needed.
 
- Tool Inflatable: This is an inflatable plug style tool with built in size/shape morphs. The plug has an easypose control dial that will adjust the entire length of the hose. There are easypose master control nodes every 20 segments. You can parent this tool to any other figure, then pose the hose back to some receptacle on another figure as needed.
 
- Tool-Plug Set: This is a combination of the two above mentioned figures. It has a non-rendering wire-frame displayed base that is used to move both the plug and tool around.  You can parent this figure to another piece of equipment.
 
- Tool Armature: This figure is designed to be able to be added to another piece of equipment. The tool head has several size/shaping morphs built in. The armatures are articulated and have length morphs built in. You can parent this figure to another piece of equipment such as the Pods from the carousel set or tool station or some of the racks/restraint machines. Have fun with it. Be creative.
 
- tool Machine 1: This is an add-on figure or stand alone with two tool heads that come out of a couple shaft receptacles. The base has some size adjustment morphs and each tool head has some size/shape morphs as well. You can add this figure to another piece of equipment. Use the morphs on the base and move the tool heads apart to adjust the distance between the two tool shafts.
 
- Machine 1: This is a multi-purpose machine that can be used for pleasuring whatever you wish. It has the tool Machine 1 figure already built into it, the same morphs in the notes above apply to this one. There is a repositionable valve and the tank/base has size/shape adjustments.
The control panel can also be re-arranged. There are a couple of hose receptacles and a mounting bracket for the tool armature.
 
- Wash Sprayer: You need to rinse down and clean your assembly line cargo, the sprayer figure does the job perfectly. It's got a rotating/swinging base armature that brings the sprayer post into position, then the sprayer heads are fully posable. The sprayer heads have a spray/mist that is morph size/
shape adjustable. Most elements on this figure and size/shape adjustable. When the cleaning is done, swing the sprayer back to the side, ready for the next product to come down the line.
 
- Wash Brush: This cool figure has a brush/cleaner that spins on an axle to either dry, wash or buff, your product as it moves down the line. There are height/width morphs on all the elements of the brush. The hose/pipe control panel can be repositioned.
 
---------------
Holders Library
---------------
 
- Crawler: This is a cool floor crawling device that you use to place other equipment on such as the Machine Base figures. If you don't want to use the Conveyor Rail or Track 1 figure, the crawler works great for transporting your 'cargo' around assembly line style. There are some size/shape morphs built
into the crawler base and tires. If you use the length morph on the base, you should move the front and rear tires forward or back to accommodate.
 
- Machine Base 1: This is a fully articulated base holder figure that you can attach many of the other Dreadworks 5 figures to such as all the Racks, Restraint Machine 2 and Tanks 2 and 4 plus the Pods in the Carousel pack. Each of those figures has a base connector that will fit into the "arm2" head of
the Machine Base. The arms of the machine base have length morphs. There are positioning pose files provided for all the before mention equipment/figures in the pose library.  To use those poses, follow the instructions provided below.
 
- Machine Base 2: This is another holder for many of the other figures in the Dreaworks 5 packages. This figure can be used as a stand-alone base for the equipment to make it appear that equipment is fixed to the floor, like a table base. It has adjustable height levels to raise and lower your attached
figures.  You can attach many of the other Dreadworks 5 figures to such as all the Racks, Restraint Machine 2 and Tanks 2 and 4 plus the Pods in the Carousel pack. Each of those figures has a base connector that will fit into the "con5" head of the Machine Base. There are positioning pose files provided for all the before mention equipment/figures in the pose library. 
 
- Machine Base 3: This is a simple base that you can place some pieces of equipment on such as the Machine Bases and the Tool Station. It has a morph height adjustable base, a length adjustable swinging armature with built in circular pad plus an added rectangular pad for square or rectangular shaped equipment bases. The circular pad has morphs to make it disappear or adjust its size. The rectangular pad has size/shape adjustment morphs as well. This figure would be good for swinging the Tool Station figure from the side of the assembly line into the front of your favorite character to do its dirty work.
 
---------------
Racks Library
---------------
 
- Rack 1: This rack is a fully adjustable spreader or stretching rack. All elements of this figure are repositionable and have some size/shape morphs for fine tuning adjustments. You will want to parent your character to the "con2" body part before applying any poses for the rack and your character. Pose files are provided for V4 (g3f in DS version) and matching poses for the rack in Pose library. There are also positioning pose files for the rack to be used with the carousel, conveyor clamps and machine base figures.
 
- Rack 3: This is a specimen table style rack. It has repositionable arm and leg hooks that slide on a rail. This is a repositionable "post" body part that has a length morph which allows this rack to be used like a table. The "post" has a morph to hide it from view as well. The "base" body part has size/shape morphs and also a morph that can make the built in table corner 'feet' longer or disappear. The "connect" body part is the base of the table that moves the entire figure around. This rack will fit into the Tank 1 figure very nicely.
 
-------------------------
Restraint Machine Library
-------------------------
 
- Restraint Machine 1: This is a large industrial style restraint machine that can put your favorite character into all sorts of accessible positions. This figure is right/left side symmetrical mirroring for fast and easy posing. The arm and leg holder/armatures are size/shape morph adjustable and fully articulated. There is also a posable and morph size/shape adjustable neck yoke. There is a non-rendering wire-frame displayed sphere near the mid/bottom part of this figure. This is the 'base' of the figure and can be used to move the entire figure around but also allows other parts of the figure to move independently. The arms, legs, neck yoke and hoses are attached to the "housing" portion of the figure, this allows the 'con1, con2 and con3' portion to move independently. Those cons can be used to fix the machine to a wall, ceiling, floor or the provided "Restraint Machine 1 Base" figure. There are also a couple of right and left side hoses that can be easyposed into a wall, ceiling, floor or other machine for added interest. Out of view, but near the hose base connector is a right and left side hose end cap that you can position independently to the end of the hoses where they connect to another figure.  Pose files are provided for V4 (g3f in DS version) and matching poses for the rack in Pose library. Parent your character to the "housing" body part of the figure before applying poses.
 
- Restraint Machine 1 Base: This is a platform/base that can be attached to the ceiling or a wall or floor. You can then parent and position the Restraint Machine 1 figure to this base for added interest. There are some size/shape morphs for fine tuning adjustments.
 
- Restraint Machine 2: This restraint machine is a rack style restraint that can works great for assembly line themed renders. It has repositionable arm and leg hook bar restraints with size/shape morphs and a padded push bar in the middle to really give your favorite character a good stretch. The restraint machine has length morphs. The base is designed to fit into the Track 1 figure or Conveyor Clamps for assembly line use. Pose files are provided for V4 (g3f in DS version) and matching poses for the restraint machine in Pose library. Parent your character to the "rack" body part of the figure before applying poses. There are also positioning pose files for the rack to be used with the carousel, conveyor clamps and
machine base figures.
 
-------------
Tanks Library
-------------
 
- Tank 1: This is a large horizontal storage tank that can accommodate the Rack 3 figure. It has a posable lid and adjustable water/fluid level. There is also a repositionable pipe/valve set connected to the tank. This can be re-arranged or moved out of view. The tank, lid and water/fluid level have size/shape morphs for fine tuning adjustments. There are some ambient lit lights on the tank that will flow in a dimly lit scene.
 
- Tank 2: This is a vertical style tank that can easily fit your favorite character. There is a built in set of restraint cuffs with 1 pose file provided for V4/g3f in ds version. Parent your character to the "tank" body part before applying the pose. There is also a pose file to hide the cuffs system into the top of the tank. There are a few repositionable parts on the tank including hose receptacles, interior fan/light and hoses
on the bottom of the tank. The tank has length morphs as a fluid level morph built in. A morph to move the tank glass up and down is also built in. There are also positioning pose files for the tank to be used with the carousel, conveyor clamps and machine base figures.
 
- Tank Oxygen Mask: This is a simple oxygen mask that fits your character’s head. There is a positioning pose file for V4 in the pose library. The mask has an easypose dial that will control the full length of the hose. There are easypose master bending nodes every 20 segments of the hose. The first segment of the hose can be moved or rotated up and down and positioned on the mask stem for better fits inside different tanks. You can pose this hose into one of the receptacles inside the tanks figures.
 
- Xtra Pipe 1: This is a stand-alone figure of the piping on Tank 1. You can use this to add another pipe set to another tank or use it as an added feature to any room or piece of equipment. There are size/shape morphs built into this figure for fine tuning.
 
--------------------
Tool Station Library
--------------------
 
- Tool Station: The tool station figure is an articulated armature that has 5 different smart prop tools that can be added to it. There are size/shape morphs on the arms and head. The smart prop tool tips for this figure are located in the props library for Dreadworks 5.
This tool station can be added to the Housing figures 1 and 2 and can be added to the Machine Base 3 figure as well. Positioning pose files for the tool station to be applied to the Housing figures are provided in the pose library.
 
-----------------------------------------------------------------------------------------------------------------------------------
Props Libraries:
 
Cuffs Library: (same cuffs are available for Genesis 3 male and female in the DazStudio Version)
 
V4_M4: These are for V4 and M4 figures.
These libraries contain smart prop cuffs to use in conjunction with the most of Davo's packages.  These smart props will automatically position and parent to your characters.
 
------------------
Tool Station Props
------------------
These props are provided in a standalone (non smart prop) version and smart prop version (to automatically fit to the tool station figure) These are provided in separate libraries.  Descriptions below:
 
- Blade: A simple blade for cutting, it has a length morph.
- tool: A tool with some size/shape morphs.
- Syringe: A simple syringe with size/shape morphs, plunger morph.
- Vacuum: A simple vacuum tube with size/shape morphs.
- Scanner: This is for scanning or for burning a barcode or mark into your characters. The scanner has an extra long shaft/base on it so it can also be hand held. A smart prop version for V4, M4, G3F and G3M are provided with a hand pose as well.
-----------------------------------------------------------------------------------------------------------------------------------
 
Pose Libraries:
 
Note 1: Poses will get your default character "close" to positioning, you may have to make some minor adjustments if your character is heavily morphed or scaled.
 
Note 2: Positional poses are provided for some items that may not be in this "Core Package". These poses are cross-package, so they are included.
 
Poses for the most of the racks, restraint machines and tanks involving V4 or G3F have an informational image in the library telling which body part of those items to parent your character to. Please do not ignore those images.
 
Positional poses for most of those items also have an informational image in the library telling which body part to parent those items to.
-----------------------------------------------------------------------------------------------------------------------------------
README FILE:   A more detailed readme file is included in the product zip file.


Application Compatibility

Daz StudioNot Supported
PoserPoser 8+
Other Notes
(Daz Studio sold separately)

Figure Compatibility

Daz FiguresGeneration 4Michael 4
  Victoria 4
Other Notes
(G3F and G3M supported files in Daz Studio Version)



"Dreadworks 5" Core Package Poser 8+

SKU: 58447
By: Davo

The ever popular Dreadworks product line now goes industrial "assembly line" style with the Dreadworks 5 Core Package. Mass produce your favorite characters in a unique array of holders, transporters, tanks, cuffs and more.

$14.99

40% off until 12/10/2018

 
Twitter Facebook Pinterest

Others Also Purchased

"Hypno-Tronic 2" Mind Control Devices For P8+
$10.19
40% off
 
Madlab 6 "Expansion Pack 1" For Poser 8+
$10.19
40% off
 
Madlab 6 "Core Package" For Poser 8+
$14.99
40% off
 
"Dreadworks 5" Carousel Pack For Poser 8+
$11.39
40% off
 
"Dreadworks 5" Expansion Pack 1 For Poser 8+
$10.19
40% off
 
King Of The Dead Skull
$10.00
 
Legacy Classic Davo "Genesis 8 Female Gags And Masks"
$14.99
40% off
 
Legacy Classic Davo "Genesis 8 Male Gags And Masks"
$14.99
40% off
 
Exercise Bike
$12.95
 
Examination Chair
$9.99
 

One of more of these images has been flagged as adult content.

If you are over 18 and wish to view these images, please hit Yes, otherwise hit No.