Utility Truck II																							01/02/19
by
Richabri 

Thank you for purchasing the the Utility Truck II prop set for Poser!

All of this product's content was created by Richabri.

https://www.cgbytes.com/content-artists/Richabri/126


===============================================================================
Description:
===============================================================================
The Utility Truck II set is an 11-piece (PP2) prop set replicating a vintage 
Cushman Truckster utility work truck. The model is presented in two varients 
with different truck beds and three different color schemes for each.

The Utility Truck II set provides two different chainsets for use with the 
tailgate: one that loads by default for use when the tailgate is closed and 
another to be used when the tailgate is open.

The Utility Truck II set also provides a toolbox model (with a top that opens)
in the three color schemes as well.

All of the truck elements are modular and you can strip the truck down to the
base cab if desired.

The Utility Truck II prop set includes the following props:

Props (PP2):
====================
!Truckster 01
!Truckster 02
!Truckster 03
!Truckster 04
!Truckster 05
!Truckster 06
           
Chainset 01
Chainset 02
           
Toolbox Blue
Toolbox Red
Toolbox Yellow
           
           
Everything comes as Poser ready props that can be loaded from the content 
palette under the Props section.

The Utility Truck II prop set also comes with all of the texture templates to allow
you to give the props a custom look of your own design.

You will need Poser 5 (or higher) or Daz Studio to use this set.


=============================================================================
Notes:
===============================================================================
Both truckbeds are parented to the base model and depending on which Truckster 
varient you are using, the remaining props are smartpropped to the corresponding
truckbed. So both of the chainsets align themselves to the Truckster varients 
that feature a tailgate and the toolbox props align to the varients that use
the flatbed.

When opening the top on the Toolbox with the Close-Open parameter dial, you'll
also have to X-Translate the top a bit to keep it from poking through the back 
of the cab on the base model. This was the only way to allow keeping the Toolbox
flush up against the back of the cab. Otherwise, you'd need to X-Translate the
whole Toolbox a bit (leaving a gap between it and the cab) to avoid having to
do that.

===============================================================================

To install:

Unzip the archive (UtilityTruck_II.zip) to the root folder
  wherever you installed Poser:
  (i.e., C:\Program Files\Smith Micro\Poser 8).
  
  The files will decompress to the following folders:
  
  /Documentation
    UtilityTruck II.txt
    License.Txt
     
  /Runtime
    /Geometries
      /Richabri
        /U-Truck2
         tr-base.obj
         tr-bed01.obj
         tr-bed02.obj
         tr-chainset01.obj
         tr-chainset02.obj
         tr-s_rail.obj
         tr-tailgate.obj
         tr-tb_bottom.obj
         tr-tb_padlock.obj
         tr-tb_top.obj
           
     /Libraries
      /Pose
         /Utility Truck II
          M4 Seated.png
          M4 Seated.pz2
          V4 Seated.png
          V4 Seated.pz2
         
       /Props
          /Utility Truck II
           !Truckster 01.png
           !Truckster 01.pp2
           !Truckster 02.png
           !Truckster 02.pp2
           !Truckster 03.png
           !Truckster 03.pp2
           !Truckster 04.png
           !Truckster 04.pp2
           !Truckster 05.png
           !Truckster 05.pp2
           !Truckster 06.png
           !Truckster 06.pp2
           Chainset 01.png
           Chainset 01.pp2
           Chainset 02.png
           Chainset 02.pp2
           Toolbox Blue.png
           Toolbox Blue.pp2
           Toolbox Red.png
           Toolbox Red.pp2
           Toolbox Yellow.png
           Toolbox Yellow.pp2
            
     /Textures
        /Richabri
           /U-Truck2
            tr-bed1-2.jpg
            tr-bed1-3.jpg
            tr-bed1.jpg
            tr-bed2-2.jpg
            tr-bed2-3.jpg
            tr-bed2.jpg
            tr-cab_ext.jpg
            tr-cab_ext2.jpg
            tr-cab_ext3.jpg
            tr-cab_int.jpg
            tr-cab_int2.jpg
            tr-cab_int3.jpg
            tr-chainset.jpg
            tr-f_cowl.jpg
            tr-f_cowl2.jpg
            tr-f_cowl3.jpg
            tr-frame.jpg
            tr-frame2.jpg
            tr-frame3.jpg
            tr-gref.JPG
            tr-key_lock.jpg
            tr-mref.jpg
            tr-pvc.jpg
            tr-rear_axles.jpg
            tr-t_parts.jpg
            tr-wheels.jpg
             
     /Templates
      /Richabri
       /U-Truck2
        U-Truck2_Templates.txt
        tr-bed1T.jpg
        tr-bed2T.jpg
        tr-cab_extT.jpg
        tr-cab_intT.jpg
        tr-f_cowlT.jpg
        tr-frameT.jpg
        tr-key_lockT.jpg
        tr-rear_axlesT.jpg
        tr-t_partsT.jpg
        tr-wheelsT.jpg
            
   
===============================================================================

The Utility Truck II props should already be appropriately scaled for a standard
Daz or Poser character.

If you have any difficulties with the installation or use of these props please
email me with a description of your problem and I will respond promptly.

Happy Rendering !!!!

Rick: richabri@netzero.net