The Food Trailer Set 12/01/18 by Richabri (Rick Bridenbaker) https://www.cgbytes.com/content-artists/Richabri/126 =============================================================================== Thank you for purchasing the Food Trailer Set for Poser! All of this product's content was created by Richabri. =============================================================================== Description: =============================================================================== The Food Trailer is a set of twenty-five Poser ready props (PP2) replicating a food vendor trailer with a fully modeled interior that contains both equipment and accessory (food) items. The set features a design scheme that favors easy navigation of the entire set by using separate walls and roof props that can be used or removed at your convenience. The Food Trailer set also comes with two PZ3 files: the FT-Empty.pz3 file that will load in only the trailer props and the FT-Loaded.pz3 file which will load in the trailer and all the equipment props. Both provide a default lighting scheme and all render parameters set to go. You will need Poser 5 (or higher) or Daz Studio to use this set. =============================================================================== The Food Trailer set comes with the following Poser ready props (PP2): TRAILER: ===================== !!Base !P-Tanks !Roof !Wall-Back !Wall-Front !Wall-Left !Wall-Right EQUIPMENT: ===================== Fridge Fryer Grill Prep Table Range SRV-Table Sink Spatula Tray Rack Vent FOOD ITEMS: ===================== !!Plate 01 !!Plate 02 !HB-Patty !HD-Group !HD-Single Burger Hot Dog Soda =============================================================================== Everything comes as Poser ready props that can be loaded from the content palette under the Props section or for even easier use, load one of the PZ3 scene files that will load in all of the props with a default lighting rig. The Food Trailer set also comes with all of the texture templates to allow you to give the props a custom look of your own design. =============================================================================== Notes: =============================================================================== LIGHTING: =============================================================================== The lighting rigs use two point lights (PT-Lite01 & PT-Lite02) and three infinite lights with only the 'PT-Lite01' light having the ability to create shadows and the other four lights providing fill and ambient lighting. Although these lighting rigs provide a fairly balanced lighting of the interior or exterior, I highly recommend adjusting it for any specific scenes you may create if you choose to use it. DOORS: =============================================================================== The main door has its joint parameters adjusted to swing open from the hinges with a normal Y-Rotation. The service window door has its joint parameters set to swing open with a normal X-Rotation. There are no limits to the swing however so you should be careful to control the final position of the door being opened. ====================================================== INSTALLATION: ====================================================== Unzip the archive (Food-Trailer.zip) to the root folder wherever you installed Poser: (i.e., C:\Program Files\Smith Micro\Poser 8). The files will decompress to the following folders: /Documentation Food-Trailer_Readme.txt License.Txt /Runtime /Geometries /Richabri /Food-Trailer ff-ch_burger.obj ff-hb_patty.obj ff-hd_group.obj ff-hd_plain.obj ff-hotdog.obj ff-plate.obj ff-soda.obj ft-backwall.obj ft-base.obj ft-fridge.obj ft-frontwall.obj ft-fry_basket.obj ft-fryer.obj ft-grill.obj ft-leftwall.obj ft-m_door.obj ft-p_table.obj ft-p_tanks.obj ft-range.obj ft-rightwall.obj ft-roof.obj ft-sink.obj ft-spatula.obj ft-srv_door.obj ft-srv_table.obj ft-t_rack.obj ft-tray.obj ft-vent.obj /Libraries /Light /Food-Trailer Inside Lighting.lt2 Inside Lighting.png Outside Lighting.lt2 Outside Lighting.png /Props /Food-Trailer !!Base.png !!Base.pp2 !P-Tanks.png !P-Tanks.pp2 !Roof.png !Roof.pp2 !Wall-Back.png !Wall-Back.pp2 !Wall-Front.png !Wall-Front.pp2 !Wall-Left.png !Wall-Left.pp2 !Wall-Right.png !Wall-Right.pp2 Fridge.png Fridge.pp2 Fryer.png Fryer.pp2 Grill.png Grill.pp2 Prep Table.png Prep Table.pp2 Range.png Range.pp2 SRV-Table.png SRV-Table.pp2 Sink.png Sink.pp2 Spatula.png Spatula.pp2 Tray Rack.png Tray Rack.pp2 Vent.png Vent.pp2 /Food Items !!Plate 01.png !!Plate 01.pp2 !!Plate 02.png !!Plate 02.pp2 !HB-Patty.png !HB-Patty.pp2 !HD-Group.png !HD-Group.pp2 !HD-Single.png !HD-Single.pp2 Burger.png Burger.pp2 Hot Dog.png Hot Dog.pp2 Soda.png Soda.pp2 /Scene /Food-Trailer FT-Empty.png FT-Empty.pz3 FT-Loaded.png FT-Loaded.pz3 /Textures /Richabri /Food-Trailer ff-ch_burger.jpg ff-hotdog.jpg ff-p_can.jpg ff-p_plate.jpg ft-deck.jpg ft-doors.jpg ft-e_walls.jpg ft-frame.jpg ft-fridge.jpg ft-fry_basket.jpg ft-fryer.jpg ft-gref.JPG ft-grill.jpg ft-i_walls.jpg ft-l_fixtures.jpg ft-mref.jpg ft-p_table.jpg ft-p_tanks.jpg ft-pvc.jpg ft-range.jpg ft-roof.jpg ft-sink1.jpg ft-sink2.jpg ft-spatula.jpg ft-srv-table.jpg ft-t_set.jpg ft-t_tray.jpg ft-trim.jpg ft-vent.jpg /Templates /Richabri /Food-Trailer Food-Trailer_Templates.txt ff-ch_burgerT.jpg ff-hotdogT.jpg ff-p_canT.jpg ff-p_plateT.jpg ft-deckT.jpg ft-doorsT.jpg ft-e_wallsT.jpg ft-frameT.jpg ft-fridgeT.jpg ft-fry_basketT.jpg ft-fryerT.jpg ft-grillT.jpg ft-i_wallsT.jpg ft-l_fixturesT.jpg ft-p_tableT.jpg ft-p_tanksT.jpg ft-rangeT.jpg ft-roofT.jpg ft-sink1T.jpg ft-sink2T.jpg ft-spatulaT.jpg ft-srv-tableT.jpg ft-t_setT.jpg ft-t_trayT.jpg ft-trimT.jpg ft-ventT.jpg ============================================================================= The Food Trailer props should already be appropriately scaled for a Daz or Poser character. Some adjustments may be necessary to account for different body morphs. If you have any difficulties with the installation or use of these props please email me with a description of your problem and I will respond promptly. Happy Rendering !!!!