The Detention Cell																								08/14/2017
by
Richabri (Rick Bridenbaker)

https://www.cgbytes.com/content-artists/Richabri/126

Thank you for purchasing the The Detention Cell set for Poser!

All of this product's content was created by Richabri.

===============================================================================
Description:
===============================================================================
The Detention Cell is a 7-piece (PP2) prop set replicating a model of a single 
prison cell that would be found in a modern detention facility.

All areas of the set are completely accessible to the camera due to the modular
design of the set that allows almost every set element to be used/removed from 
your scene as necessary.

The Bench is smartpropped to the !!Floor model and loads in with the floor but
since it's a separate prop, it can be adjusted if necessary to fit any 
particular character/scene requirements. The same is true with the Blanket and
Pillow props - they are separate props that are smartpropped to the Bed model
and load in automatically with it but since they are separate props, they can
be repositioned or removed if needed.

The Detention Cell also comes with a PZ3 file that will load in the complete 
set with a default lighting scheme and all render parameters set to go.

The Detention Cell set includes everything you need to set up a prison cell 
scene including:

Props (PP2):
====================

!!Ceiling
!!Floor
!Wall-Back
!Wall-Front
!Wall-Left
!Wall-Right
Bed

          
Everything comes as Poser ready props that can be loaded from the content 
palette under the Props section or for even easier use, load the PZ3 scene 
file that will load in the props with a default lighting rig.

The Detention Cell also comes with all of the texture templates to allow
you to give the props a custom look of your own design.

You will need Poser 5 (or higher) or Daz Studio to use this set.


=============================================================================
Notes:
===============================================================================
The default lighting scheme uses one point light (Main) and three infinite lights 
with only the 'Main' light having the ability to create shadows and the other three 
providing fill and ambient lighting. Although this lighting rig provides a fairly
balanced lighting of the complete interior I highly recommend adjusting it for any
specific scenes you may create if you choose to use it.

The main door has its joint parameters adjusted to swing open from the hinges with
a normal Y-Rotation. There are no limits to the swing however so you should be 
careful to control the final position of the door(s) being opened.

===============================================================================

To install:

Unzip the archive (DetentionCell.zip) to the root folder
  wherever you installed Poser:
  (i.e., C:\Program Files\Smith Micro\Poser 8).
  
  The files will decompress to the following folders:
  
  /Documentation
    Detention Cell.txt
    License.Txt
     
  /Runtime
    /Geometries
      /Richabri
        /Detention Cell
         dc-b_wall.obj
         dc-bed.obj
         dc-bench.obj
         dc-blanket.obj
         dc-c_door.obj
         dc-ceiling.obj
         dc-f_wall.obj
         dc-floor.obj
         dc-l_wall.obj
         dc-pillow.obj
         dc-r_wall.obj
           
     /Libraries
      /Light
         /Detention Cell
          !Default Lighting.lt2
          !Default Lighting.png
         
       /Props
          /Detention Cell
           !!Ceiling.png
           !!Ceiling.pp2
           !!Floor.png
           !!Floor.pp2
           !Wall-Back.png
           !Wall-Back.pp2
           !Wall-Front.png
           !Wall-Front.pp2
           !Wall-Left.png
           !Wall-Left.pp2
           !Wall-Right.png
           !Wall-Right.pp2
           Bed.png
           Bed.pp2
            
       /Scene
         Detention Cell
          Detention Cell.png
          Detention Cell.pz3
         
     /Textures
        /Richabri
           /Detention Cell
            dc-bed.jpg
            dc-bench.jpg
            dc-blanket.jpg
            dc-ceiling.jpg
            dc-door-win.jpg
            dc-floor.jpg
            dc-grates.jpg
            dc-gref.JPG
            dc-lt-fixture.jpg
            dc-mref.jpg
            dc-pillow.jpg
            dc-t_sink.jpg
            dc-table.jpg
            dc-tp.jpg
            dc-walls.jpg
             
     /Templates
      /Richabri
       /Detention Cell
        Detention Cell_Templates.txt
        dc-bedT.jpg
        dc-benchT.jpg
        dc-blanketT.jpg
        dc-ceilingT.jpg
        dc-door-winT.jpg
        dc-floorT.jpg
        dc-gratesT.jpg
        dc-lt-fixtureT.jpg
        dc-pillowT.jpg
        dc-t_sinkT.jpg
        dc-tableT.jpg
        dc-tpT.jpg
        dc-wallsT.jpg
            
   
===============================================================================

The Detention Cell props should already be appropriately scaled for a standard 
Daz or Poser character.

If you have any difficulties with the installation or use of these props please
email me with a description of your problem and I will respond promptly.

Happy Rendering !!!!